J Periodontal Res:牙周膜细胞在RGD合成多肽结合物涂层上的功能和细胞表面特征
2020-05-17 lishiting MedSci原创
这篇研究的目的是为了评估含整联蛋白结合RGD序列(SAK-c[RGDfC], AK-c[RGDfC]和SAK-opn)的3种不同合成结合物对人PDLCs黏附以及随后功能的影响。
牙周膜细胞(PDLCs)是牙周组织愈合与再生的重要来源。适当的细胞黏附是贴壁依赖性细胞存活的关键,也是为了进一步激活细胞内信号以实现重要的细胞功能。这篇研究的目的是为了评估含整联蛋白结合RGD序列(SAK-c[RGDfC], AK-c[RGDfC]和SAK-opn)的3种不同合成结合物对人PDLCs黏附以及随后功能的影响,包括:增殖、迁移、细胞表面分子的反应和成骨分化。
研究通过固相法制备合成肽,并通过硫醚连接将其附着于支链聚合多肽上。通过简单吸附法制作组织培养塑料或电阵列涂层。从24颗拔除的人第三磨牙中分离PDLCs。通过real-time impedimetric xCELLigence SP system检测细胞的黏附和增殖。通过Ibidi? Culture inserts检测细胞迁移。通过流式细胞仪检测细胞表面抗原。通过ALP检测和茜素红S染色评估成骨分化,并通过实时qPCR检测成骨分化相关基因表达。通过real-time Electrical Cell-Substrate Impedance Spectroscopy (ECIS)监测PDLCs的成骨分化和成脂分化。
结果显示,所有3种合成的RGD 肽均能促进PDLC的黏附(P < .05)。当从培养基中去除动物血清时,SAK-c[RGDfC]和AK-c[RGDfC]能够促进细胞黏附(P < .05)。SAK-c[RGDfC]和AK-c[RGDfC]能够增加细胞迁移(P < .05)。在施以1周的处理后,所有3种合成肽均能上调CD105 (1.7- to 2.2-fold)和CD146 (1.3- to 1.5-fold)标志物的表达,并且形成不同的整联模式。在没有成骨诱导的情况下,SAK-c[RGDfC]和AK-c[RGDfC]能够增加ALP活性(1.4-fold)和ARS (1.8- and 2.0-fold),并且所有肽在成骨诱导条件下均能促进矿化。RT-qPCR结果显示,成骨诱导的PDLCs内bone sialoprotein (5.0- to 7.8-fold), osteocalcin (2.3- to 2.7-fold)和ALP (1.9- to 2.3-fold)的基因表达明显上调。ECIS监测结果显示,与成脂诱导或未诱导相比,成骨诱导会产生更强的阻抗(P < .05)。
结论:研究表明,SAK-c[RGDfC]和AK-c[RGDfC]能够促进PDLCs的黏附和迁移,并支持PDLCs的成骨分化。这些环状肽在再生医疗中可作为一种可应用的生物相容性材料。
原始出处:
Khorolsuren Z, Lang O, et al. Functional and cell surface characteristics of periodontal ligament cells (PDLCs) on RGD-synthetic polypeptide conjugate coatings. J Periodontal Res. 2020 May 14. doi: 10.1111/jre.12760.
本网站所有内容来源注明为“梅斯医学”或“MedSci原创”的文字、图片和音视频资料,版权均属于梅斯医学所有。非经授权,任何媒体、网站或个人不得转载,授权转载时须注明来源为“梅斯医学”。其它来源的文章系转载文章,或“梅斯号”自媒体发布的文章,仅系出于传递更多信息之目的,本站仅负责审核内容合规,其内容不代表本站立场,本站不负责内容的准确性和版权。如果存在侵权、或不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
在此留言
#牙周膜#
47
#PE#
25
#牙周膜细胞#
47
#牙周#
29
#多肽#
42