期刊： CANADIAN METALLURGICAL QUARTERLY, 2021; 60 (1)
High-resolution TEM microscopy studies were performed to investigate the crystal structure change of the carbon cathode with sodium intercalation. Alt......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2020; 59 (1)
Arsenic can cause environmental pollution and also affect mineral processing efficiency. To determine the mechanism of separating arsenic from mineral......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2020; 59 (2)
The foaming behaviour originating from the reduction of iron oxide in molten CaO-SiO2-MgO-Al2O3-TiO2 slag was studied at 1500 degrees C with the aid o......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2020; 59 (1)
The kinetics and mechanism of the reduction of manganese dioxide ore by calcium lignosulfonate (CLS) in acid solution were investigated. The results s......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2020; 59 (2)
To promote biooxidation efficiency of a refractory high-sulphide gold concentrate, microwave technology has been applied. Two factors were investigate......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2020; 59 (2)
The character and cause of sliver defect on IF steel sheet surface are studied by means of SEM, unstable flow in mould could induce surface velocity a......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2020; 59 (3)
The effect of high-pressure grinding roll (HPGR) comminution on the physical properties of ore particles and heap leaching of gold was investigated co......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2020; 59 (3)
The oxygen pressure leaching of sphalerite in sulphuric acid solutions is a slow process in the absence of iron because of the limitations of the oxyg......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2019; 58 (1)
The coherent jet technology was widely used to improve the stirring effect of molten bath in steelmaking field, and the key to this technology was to ......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2019; 58 (1)
Styryl phosphoric acid (SPA) is considered to be one of the best selective collectors for rutile flotation. Yet high consumption and considerable envi......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2019; 58 (3)
Ca treatment is generally used in the production of Al-deoxidised steel to prevent nozzle blockage by modifying high melting point inclusions such as ......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2019; 58 (2)
The separation of zinc and iron is essential in hydrometallurgical processes, especially for treating high-iron sphalerite. The hematite precipitation......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2019; 58 (2)
A route of vacuum carbothermal reduction of Panzhihua ilmenite was introduced to prepare Ti-rich material. The effects of mass ratio of graphite to il......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2019; 58 (2)
In copper smelting process, oxygen-enriched smelting leads to the enrichment of magnetite and increase of slag viscosity, which is not conducive to th......
期刊： CANADIAN METALLURGICAL QUARTERLY, 2019; 58 (2)
The reduction of chromium-bearing vanadium-titanium magnetite sinter (CVTMS) by CO was investigated at 1123-1223 K. The reduction degree increased wit......
