Analysis of Precipitation of NbC in Low Reduction Ratio Conditions

期刊： METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2021; 10 (3)

Compared with the thin plate production process, the behavior of NbC precipitating would be different in thicker plate from the rolling processing due......

Influence of Silicon and Manganese on the Mechanical Properties of Additive Manufactured Cu-Al Alloys by Cold Metal Transfer Welding

期刊： METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2021; 10 (3)

Cu-6.5% Al alloys and Cu-6.5% Al alloys containing small amounts of silicon (Si) and manganese (Mn) were deposited using wire arc additive manufacturi......

Effect of Phase Proportion on Wear Behavior of Al-Cr-Fe-Ni Dual-Phase High Entropy Alloys

期刊： METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2021; 10 (1)

Al-Cr-Fe-Ni dual-phase high entropy alloys (HEAs) were prepared by arc melting, and the microstructure and wear behavior of HEAs were investigated. Th......

Flow Curve and Microstructure Analysis of a ZK60 Magnesium Alloy during Hot Compression Tests

期刊： METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2021; 10 (1)

In this work, a commercial extruded Mg-6Zn-0.5Zr (ZK60) magnesium alloy was compressed to investigate the correlations among flow curve shape, microst......

Effect of Sensitizing Treatment on the Microstructure and Susceptibility to Intergranular Corrosion of High-Nitrogen Austenitic Stainless Steel

期刊： METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2021; 10 (1)

This experiment investigated the effect of different sensitizing treatment times (2-48 h) at 800 degrees C on the microstructure and intergranular cor......