期刊： INTERMETALLICS, 2021; 133 ()
The evolution of the texture and microstructure of TiB-TC25G composites, heat-treated in the high ?+? phase field, have been studied with different co......
期刊： INTERMETALLICS, 2021; 135 ()
The FeCoNi(CuAl)0.8 high-entropy alloy (HEA) consists of both face-centered cubic (FCC) phase and bodycentered cubic (BCC) phase which allows for a fi......
期刊： INTERMETALLICS, 2021; 135 ()
The 18R and 14H long-period stacking ordered (LPSO) phases were generally considered that only the basal and non-basal a c+a c+a c+a slips are localiz......
期刊： INTERMETALLICS, 2021; 138 ()
According to parameters of atomic size difference (delta), valence electron concentration (VEC) and the cost effectiveness, a series of high Fe-conten......
期刊： INTERMETALLICS, 2021; 137 ()
A La74Al14Cu6Ni6 bulk metallic glass matrix composite (BMGMC) with in situ spherical alpha-La phases and micron sized AlLa3 intermetallic compounds is......
期刊： INTERMETALLICS, 2021; 135 ()
The isothermal oxidation behaviour of Ti-44Al-4Nb-4Mn-1B, Ti-44Al-4Nb-4Zr-1B and Ti-44Al-8Nb-1B alloys has been studied in Air-H2O environment under a......
期刊： INTERMETALLICS, 2021; 136 ()
Magnetic cooling (MC) by utilizing the magnetocaloric effect (MCE) has been considered as one of the most potential promising solid state alternative ......
期刊： INTERMETALLICS, 2021; 137 ()
The formation of Nd6Fe13Ga phase promoted the continuity and non-ferromagnetism of grain boundary (GB) phases of Nd-Fe-Cu-Ga-B magnets during proper p......
期刊： INTERMETALLICS, 2021; 135 ()
In recent decades, metal-intermetallic laminated (MIL) composites are of great interest to the scientific community. The intermetallic layers in such ......
期刊： INTERMETALLICS, 2021; 133 ()
Here we propose an effective method to suppress the interface reaction between Al and Mg using Ti as interlayer and improve the uniformity of interfac......
期刊： INTERMETALLICS, 2021; 137 ()
Tailoring magnetic behavior by composition and annealing is an effective way. The phase transition from the face-centered-cubic (FCC) to B2 structure ......
期刊： INTERMETALLICS, 2021; 138 ()
The effects of heat treatment on the microstructure, wear behavior and corrosion resistance of AlCoCrFeNiSi high-entropy alloy were investigated. Resu......
期刊： INTERMETALLICS, 2021; 134 ()
Multiple precipitates have been utilized so as to improve the strength and strain hardening rate of austenitebased low density steel. Thus, a two-step......
期刊： INTERMETALLICS, 2021; 137 ()
Single crystals of Sn4Sb3 with mm size have been obtained for the first time via a Sn flux method. Structural refinements confirm its trigonal structu......
期刊： INTERMETALLICS, 2021; 133 ()
2D forging processes are adopted to tailor the microstructures and mechanical properties of near ? titanium alloys with different boron contents and t......
