期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (8)
Homogenization treatment for Al-Zn-Mg-Cu alloy with Ho addition was investigated by scanning electron microscope (SEM), optical microscope (OM), and d......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (5)
The acoustic emission (AE) response to brittle cutting of 6H-SiC was studied by molecular dynamics simulation. The micro-deformation and crack formati......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (2)
The effect of sample dimensions and process parameters (beam current, scan speed, offset focus and scan length) of electron beam melting (EBM) system ......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (8)
Fe0.5MnNi1.5CrNbx (x=0, 0.05, 0.1, molar ratio) high-entropy alloys were prepared by vacuum induction melting. The effect of Nb content on the microst......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (7)
The emission spectra of high color rendering phosphors, mixed with the yttrium aluminium garnet, silicon based oxynitride and nitride based phosphors,......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (2)
Low cycle fatigue (LCF) behavior of Ti-3Al-5Mo-4Cr-2Zr-1Fe (Ti-35421) alloy with bimodal microstructure consisting of lath alpha(alpha(p)) and beta(tr......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (3)
Low-temperature slow rate extrusion (LTSRE) and electrical pulse treatment (EPT) were used to obtain the AZ91 Mg alloy with bimodal microstructure. Re......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (7)
Based on the Schaeffler diagram, the solidification cracking susceptibility of austenitic alloys during laser welding was investigated systematically.......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (4)
Dense Co- and Ni-bonded Ti(C0.6T0.4) matrix cermets with secondary carbides, i.e., WC, Mo2C, and NbC, were prepared by liquid phase sintering in vacuu......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (5)
By advanced analytical transmission electron microscope, an unexpected interdiffusion between magnetron sputtered Fe-Co thin film and Al2O3 substrate ......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (2)
A series of Ti-XV-15Cr (X=20, 25, 30, 35, wt%) alloys were prepared by directed energy deposition (DED) technique, where pure Ti, pure V, and pure Cr ......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (2)
Fusible alloy with rated temperature of 142 degrees C was designed by adding Cu and Sb elements into Sn-Bi eutectic alloy. Besides, the melting temper......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (2)
The evolution of grain morphology is accompanied with grain boundary (GB) migration, and the grain morphology significantly determines the properties.......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (2)
Rigid restraint thermal self-compressing bonding (TSCB) by local induction heating is a new diffusion bonding technique proposed in this research. Exp......
期刊： RARE METAL MATERIALS AND ENGINEERING, 2021; 50 (3)
High-purity and dense Smi_2EuxBaxB6 (x=0.1, 0.2, 0.3) polycrystals were prepared by a boron/carbonthermal reduction-hot pressing sintering (BCTR &......
