期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (2)
This study focused on the fatigue and corrosion fatigue of maraging steel 18Ni (250). The 18Ni (250) samples were tested for axial fatigue in air and ......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
Cu-2wt%Ag alloy with diameter of 10 mm was fabricated by induction heating directional solidification (IHDS). The effect of different mold temperature......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (2)
Refill friction stir spot welding (refill FSSW) was used to weld 3.2-mm-thick 2060 aluminum alloy. Joint formation, defect characteristics and tensile......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
A hot compression test was conducted on a Gleeble-3500 thermo-simulation machine to study the critical conditions and kinetics of dynamic recrystalliz......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (2)
A source of pure silicon was added into an alloy refining system during a refining process with the application of a direct electric current. The effe......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
This study focused on the fatigue and corrosion fatigue of managing steel 18Ni (250). The 18Ni (250) samples were tested for axial fatigue in air and ......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
The interface characteristics, bending and impact behavior, as well as fracture characteristics of stainless steel clad plates fabricated by vacuum ho......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
Ultrasonic assisted active-passive filling friction stir repairing (A-PFFSR) was proposed to repair volume defects in the metallic parts. Sound joints......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
Thermal fatigue properties of WCu45/FeCr18Ni9 steel brazed joint with Ni-Cr-Si-B tiller metal were investigated. Results indicated that the fatigue da......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
Ti-containing steel weld metals with Al contents of 0.01-0.085% were prepared. The effects of Al contents on the inclusions evolution were investigate......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
The study investigates the effect of heat treatment on the microstructure evolution and properties of an age-hardened Cu-3Ti-2Mg alloy. The precipitat......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
Refill friction stir spot welding (RFSSW) was used to weld the 2060 aluminum alloy with 2 mm thickness. Joint formation, defect characteristics and me......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
The high-temperature deformation process and dynamic recrystallization (DRX) process of 21-4N were investigated under the conditions of the deformatio......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2021; 66 (1)
Nickel slag has a high-content iron and is a secondary utilization resource with great development potential. The coal-based direct reduction is an in......
期刊： ARCHIVES OF METALLURGY AND MATERIALS, 2020; 65 (1)
Bacterial adsorption on mineral surface is one of the key steps in bioleaching process. The bacteria adsorb on the mineral surface via the extracellul......
