期刊： POWDER METALLURGY, 2021; 64 (4)
To improve the forging safety of powder-forged products, the hot-deformation behaviour of sintered and forged alloys was investigated and compared in ......
期刊： POWDER METALLURGY, 2021; 64 (4)
In this work, copper ferroalloys (CFAs) with various Fe contents (5, 10 and 30 wt-%) were fabricated via the mechanical alloying and vacuum sintering ......
Powder metallurgy (PM) Ti6Al4V alloy was prepared from HDH alloy powder by vacuum pressureless sintering. To study its high-temperature deformation be......
期刊： POWDER METALLURGY, 2020; 63 (1)
An Al-Cu-Mg-Si alloy was prepared by conventional press-sintering powder metallurgy using elemental Al powder. The phase transformation process of Al-......
期刊： POWDER METALLURGY, 2020; 63 (1)
In this paper, in-situ VN reinforced powder metallurgy high-speed steel was fabricated from water atomised powder via pressureless sintering. During s......
期刊： POWDER METALLURGY, 2020; 63 (2)
In situ TiB2 and TiC reinforced copper matrix composites with tailored heterogeneous structure were fabricated via high-energy ball milling of Cu, TiH......
期刊： POWDER METALLURGY, 2020; 63 (3)
In this paper, a combined processing method of mechanical alloying and infiltration was used to prepare the WCu-xwt-%SiC (x = 0.5, 1, 2, 3) composites......
期刊： POWDER METALLURGY, 2020; 63 (3)
In this work, Ni(49.4)Ti(50.6)Belleville washers are prepared by metal injection moulding (MIM). The martensitic transition temperatures and service p......
期刊： POWDER METALLURGY, 2020; 63 (5)
The feasibility of selective laser melting (SLM) was investigated for manufacturing WC-20Co cemented carbide in this study. Both the microstructure an......
期刊： POWDER METALLURGY, 2020; 63 (5)
In this work, the powder of a Ni-based superalloy (EP741NP) was sieved into two batches, one with coarse powder (63-150 mu m), and the other containin......
期刊： POWDER METALLURGY, 2020; 63 (5)
In this study, a novel W and TiO(2)synergistic strengthened copper matrix nanocomposite was prepared by a powder metallurgy route with a mechano-chemi......
期刊： POWDER METALLURGY, 2019; 62 (1)
The equiatomic ratio CrMnFeCoNi high entropy alloy (HEA) was prepared by mechanical alloying (MA) and spark plasma sintering. This paper reports the b......
期刊： POWDER METALLURGY, 2019; 62 (1)
A novel low-cost gas atomisation technology producing spherical titanium powder (wire induction heating gas atomisation, WIGA) has been developed for ......
期刊： POWDER METALLURGY, 2019; 62 (1)
Nickel-based K417G superalloy powder is the main material used in laser additive manufacturing (LAM) of aerospace engine turbine blades. In this study......
期刊： POWDER METALLURGY, 2019; 62 (1)
A new multi-functional binder with adhesive and lubricant effect was designed, and the thixotropic properties of the binder components and the resulti......
