期刊： ISIJ INTERNATIONAL, 2021; 61 (3)
Understanding the mechanism of particle aggregation and dispersion at a liquid surface is important for the design and fabrication of novel materials.......
期刊： ISIJ INTERNATIONAL, 2021; 61 (6)
Carbon combustion provides energy to reach essential temperatures in the sintering packed bed. A visual and quantitative evaluation on the energy inpu......
期刊： ISIJ INTERNATIONAL, 2021; 61 (3)
In order to eliminate the TiN inclusion emerging from the molten steel and maintain the stable performance of mould flux during continuous casting of ......
期刊： ISIJ INTERNATIONAL, 2021; 61 (6)
In this paper, the effect of solidification pressure on the dendrite structure and characteristics of carbides in H13 die steel ingot was investigated......
期刊： ISIJ INTERNATIONAL, 2021; 61 (8)
This study investigates cracking and healing behavior during the oxide scale formation on high-carbon steel. The steel was heated to 1 000 degrees C a......
期刊： ISIJ INTERNATIONAL, 2021; 61 (3)
To effectively recycle and utilize vanadium and titanium resource from the vanadium slag, the crystallization and separation behaviors of V-spinel pha......
期刊： ISIJ INTERNATIONAL, 2021; 61 (5)
Molecular dynamics (MD) simulations have been used to study the effect of Na ions on the structure properties of CaO-SiO2-Na2O melts. The short-range ......
期刊： ISIJ INTERNATIONAL, 2021; 61 (7)
End-point temperature preset of molten steel in the final refining unit is as important as its prediction for casting temperature control. However, it......
期刊： ISIJ INTERNATIONAL, 2021; 61 (5)
A new equilibrium calculation model for the slag composition design of bearing steel is established through the combination between IMCT and FactSage ......
期刊： ISIJ INTERNATIONAL, 2021; 61 (6)
The effects of Co on the precipitation evolution and tensile/creep properties of the alumina -forming austenitic (AFA) stainless steel at 700 degrees ......
期刊： ISIJ INTERNATIONAL, 2021; 61 (3)
Boric acid as a negative catalyst can decrease the coke reactivity, and increase coke strength after reaction which is essentially important for high ......
期刊： ISIJ INTERNATIONAL, 2021; 61 (5)
Calcium ferrite is the main binder phase in sinter, which affects the physical and metallurgical properties of sinter. It was also widely applied to p......
期刊： ISIJ INTERNATIONAL, 2021; 61 (6)
A mathematical model coupled with electromagnetic field, flow, heat transfer and solidification has been developed to simulate the bias flow caused by......
期刊： ISIJ INTERNATIONAL, 2021; 61 (7)
In this paper, porous ceramics were prepared by controlling the composition and sintering temperature of raw materials based on slag from steel refini......
期刊： ISIJ INTERNATIONAL, 2021; 61 (5)
The evolution of inclusions with Ce addition and Ca treatment in Al-killed steel during RH refining process was investigated through experimental obse......
