期刊： CHINA FOUNDRY, 2021; 18 (2)
Steel ingot with a large height-to-diameter ratio is utilized to produce multiple products by one stock in practice. Water cooling is a usual way to e......
期刊： CHINA FOUNDRY, 2021; 18 (2)
Effects of ageing treatment on the microstructures, mechanical properties and corrosion behavior of the Mg-4.2Zn-1.7RE-0.8Zr-xCa-ySr [x=0, 0.2 (wt.%),......
期刊： CHINA FOUNDRY, 2021; 18 (2)
The effects of two types of magnetic fields, namely harmonic magnetic field (HMF) and pulse magnetic field (PMF) on magnetic flux density, Lorentz for......
期刊： CHINA FOUNDRY, 2021; 18 (2)
The materials used in variable temperature conditions are required to have excellent thermal fatigue performance. The effects of laser shock processin......
期刊： CHINA FOUNDRY, 2021; 18 (3)
Inconel 718 alloys were fabricated by selective laser melting under different scanning speeds to investigate the change of the morphology of molten po......
期刊： CHINA FOUNDRY, 2021; 18 (3)
In this work, a new (Y, Gd)H-2 precipitate was identified and systematically investigated in the as-cast Mg-6Gd-3Y-0.5Zr alloy by XRD, SEM with EDS, T......
期刊： CHINA FOUNDRY, 2021; 18 (2)
Although icosahedral quasicrystal phase (denoted as I-phase) has been verified as an outstanding reinforcing phase, the mechanical properties of quasi......
期刊： CHINA FOUNDRY, 2021; 18 (3)
K416B Ni-based superalloy with high W content has good high temperature properties and low cost, which has a great development potential. To investiga......
期刊： CHINA FOUNDRY, 2021; 18 (2)
The microstructure of Ti-6-4 components produced by additive manufacturing suffers from the coarse and elongated prior-beta grain, which leads to a de......
期刊： CHINA FOUNDRY, 2021; 18 (2)
Numerical simulation technology has been widely used in the foundry industry to analyze and improve casting processes. During the casting filling proc......
期刊： CHINA FOUNDRY, 2021; 18 (3)
Large-size primary MC carbides can significantly reduce the performance of M2 high-speed steel. To better control the morphology and size of primary M......
期刊： CHINA FOUNDRY, 2021; 18 (2)
The thin ribbons and the bulk cylindrical rods with diameters of 2 mm and 10 mm of the Vit1 metallic glass (MG) were prepared by the single roller mel......
期刊： CHINA FOUNDRY, 2021; 18 (3)
Al-5Ti-B and Al-5Ti-B-Gd master alloy refiners were fabricated by fluorine salt casting method. The microstructure and phase constitution of the maste......
期刊： CHINA FOUNDRY, 2021; 18 (3)
The effect of thermal exposure on the microstructure and creep properties of the Ni-based single crystal superalloy in different test conditions was s......
期刊： CHINA FOUNDRY, 2021; 18 (3)
The mechanical properties of an austenite-based Fe-Mn-Al-C lightweight steel were improved by co-precipitation of nanoscale Cu-rich and kappa-carbide ......
