期刊： MATERIALS AT HIGH TEMPERATURES, 2021; 38 (4)
In this work, the effect of Ce and Zr on the wear performance of a nickel-saving austenitic heat-resistant cast steel at room temperature and 900 degr......
期刊： MATERIALS AT HIGH TEMPERATURES, 2021; 38 (3)
By performing solution treatment at various temperatures, creep property measurements, and microstructural observations, the influence of the solution......
期刊： MATERIALS AT HIGH TEMPERATURES, ; ()
The present work deals with the microstructure evolution during creep of P91 steel. In particular, the changes of prior austenite grain (PAG) and low-......
期刊： MATERIALS AT HIGH TEMPERATURES, 2021; 38 (2)
A two-step method combining reactive melt infiltration and slurry coating was employed to fabricate completely protected C/C composites. Microstructur......
期刊： MATERIALS AT HIGH TEMPERATURES, 2021; 38 (2)
The microstructure and mechanical properties of a hot-rolled Ti-22Al-25Nb (at%) alloy sheet after aging and solution-aging treatment were studied. A t......
期刊： MATERIALS AT HIGH TEMPERATURES, 2021; 38 (2)
Argon-arc welds of GH 4169 were produced. Microstructural observations and microhardness tests were performed to distinguish the different regions of ......
期刊： MATERIALS AT HIGH TEMPERATURES, 2020; 37 (2)
This paper reports (1) an application of the modified hyperbolic sine law to P92 for the minimum creep strain rate over a wider range of stress level,......
期刊： MATERIALS AT HIGH TEMPERATURES, 2020; 37 (2)
By means of creep properties measurement and microstructure observation, the creep and damage behaviours of the Mo-containing single crystal Ni-based ......
期刊： MATERIALS AT HIGH TEMPERATURES, 2020; 37 (3)
The decarburisation annealing processes of Nb-bearing grain-oriented silicon steel under different conditions were conducted. The effect of nitriding ......
期刊： MATERIALS AT HIGH TEMPERATURES, 2020; 37 (3)
Microstructure evolution of P92 heat-resistant steel during long-term service has high influence on the creep property. In this paper, P92 heat-resist......
期刊： MATERIALS AT HIGH TEMPERATURES, 2020; 37 (5)
The current study investigated the short-term oxidation behaviour of a Si-containing spring steel 60Si2MnA in dry air and wet air (containing 24.8%H2O......
期刊： MATERIALS AT HIGH TEMPERATURES, 2020; 37 (4)
Al2O3-ZrO(2)and Al2O3-ZrO2-TiO(2)composite coatings were prepared by plasma spraying. The effects of TiO(2)on the microstructure evolution and thermal......
期刊： MATERIALS AT HIGH TEMPERATURES, 2020; 37 (4)
In this paper, the effects of dual-cracks on the CCG behaviour of Hastelloy C276-BNi2 brazed joints were investigated. And the effects of inner crack ......
期刊： MATERIALS AT HIGH TEMPERATURES, 2020; 37 (5)
Y2O3-ZrO(2)thermal barrier coatings on a GH2132 alloy were fabricated by atmospheric plasma spraying method. Failure behaviours of the thermal barrier......
期刊： MATERIALS AT HIGH TEMPERATURES, 2020; 37 (6)
The current study investigates the mechanical behaviors of P92 steel in the stress-controlled cyclic tensile-loading tests with holding period. First,......
