期刊： METALLURGIST, 2021; 65 (1-2)
Bending deformation behavior of 6061 aluminum alloy sheets after different aging times was investigated using three-point bending tests. The bending d......
期刊： METALLURGIST, 2021; 65 (3-4)
It is difficult to measure temperature changes inside steel blooms during steel production, so reliable numerical simulations are important for proces......
期刊： METALLURGIST, 2020; 64 (7-8)
The corrosion behaviors of Ni-Cr and 20MnSi steel bars in a simulated marine atmosphere are compared using alternate immersion corrosion tests and ele......
期刊： METALLURGIST, 2020; 63 (9-10)
We present the results of experimental investigation of the electric resistance and thermal conductivity of A356.0 and A413.1 aluminum alloys crystall......
期刊： METALLURGIST, 2019; 62 (9-10)
Pearlite transformation is a necessary step in the production of ultra-high strength wires and nanostructured bainitic steels. The initial austenite g......
期刊： METALLURGIST, 2019; 63 (5-6)
A mold oscillating system for continuous casting machines has been developed based on a nonsinusoidal oscillation profile with an online oscillation c......
期刊： METALLURGIST, 2019; 63 (5-6)
We study the influence of gas porosity caused by the presence of dissolved hydrogen on the mechanical properties of Al-Si alloys. The results are obta......
期刊： METALLURGIST, 2018; 62 (7-8)
A reasonable allocation of load distribution is expected when the full capacity of rolling equipment is exerted, and energy conservation and strip qua......
期刊： METALLURGIST, 2018; 62 (1-2)
The thermoplastic characteristics of high-manganese steels with different phosphorus and sulfur contents were investigated. The zero-ductility tempera......
期刊： METALLURGIST, 2018; 62 (3-4)
Two types of steel specimens were prepared containing 3.5% Ni in order to study the mechanical and corrosion properties of bridge steels in a marine a......
期刊： METALLURGIST, 2017; 61 (7-8)
The uniaxial-compression creep behavior of semi-graphitic carbon products was investigated using modified Rapoport equipment in a K3AlF6-Na3AlF6-AlF3 ......
期刊： METALLURGIST, 2017; 61 (7-8)
An experimental study on the preparation of fluxed pellets using common and widely available iron ore and additives was conducted. The number of drops......
期刊： METALLURGIST, 2017; 60 (11-12)
Nanostructured bainitic steel consisting of nanoscale bainitic-ferrite and retained austenite has been obtained by transforming at 200A degrees C for ......
期刊： METALLURGIST, 2017; 61 (1-2)
Modeling is conducted for solidification and formation of a cast structure of continuously-cast blooms of steel GCr15 (Russian analog is steel ShKh15)......
