期刊： CHINA SURFACE ENGINEERING, 2021; 34 (1)
Lightweight multi-component alloy is a new type of lightweight alloy with unique crystal structure and mechanical properties, which has great developm......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (3)
Porosity is an important factor affecting the crack extension at the interface between oxide and steel matrix. In this paper, two models including Mod......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (3)
There are number of "micro-particles" on the surface of the arc ion plated AlCrN coatings, which resulted in the high surface roughness, and decreased......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (3)
As an effective way to improve the wear resistant property and service life of mechanical components, surface treatment has been widely used in indust......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (2)
Laser additive manufacturing is an incremental manufacturing technology that applies laser energy to melt powder or wire to achieve layer-by-layer sta......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (3)
AA6061-T6 aluminum alloy is widely used in the automobile industry due to its high specific strength and good formability, but its poor cavitation cor......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (2)
Comparable study regarding cell volume, binding energy, total electronic density, and mechanical properties were carried out for alpha-Al2O3, alpha-(A......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (2)
Inconel 718 alloy was prepared by selective laser melting technique and then processed under different temperature, time and cooling conditions. The m......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (3)
With the development of China's power system, distribution network lines have completed the full coverage of the multi-regions and would suffer from v......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (1)
Silver coatings were prepared by medium frequency-direct current(MF-DC) magnetron sputtering and traditional electroplating on Inconel 718. The hardne......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (1)
Thermal-diffusion molybdenizing is one of the methods uesd for modifying the chemical composition of steel surface. Mo can improve hardenability of st......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (2)
Textured Cr-DLC film was prepared on the surface of 06Cr19Ni10 alloy and used to study the influence on the adhesion properties of the dough sheet wit......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (2)
Ni60 heat-resistant cladding layer was produced on the surface of TC4 titanium alloy by plasma cladding. X-ray diffraction, scanning electron microsco......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (3)
The degree of failure is one of the key factors to determine the remanufacturability of retired parts. And the degree of failure is difficult to quant......
期刊： CHINA SURFACE ENGINEERING, 2021; 34 (2)
Rubber is widely used as an essential sealing material in aerospace, petrochemical industry, automotive industry and other fields due to its good comp......
